? supplier : samsung electro-mechanics ? samsung p/n: CL05A475MP5NRNC ? product : multi-layer ceramic capacitor ? description : cap, 4.7 ? , 10v, 20%, x5r, 0402 cl 05 a 475 m p 5 n r n c ? ???? series samsung multi-layer ceramic capacitor size 0402 (inch code) l: 1.0 0.15 mm w: 0.15 mm dielectric x5r inner electrode capacitance 4.7 ? termination capacitance 20 % plating (pb free) tolerance product 0402 size dimension spec rated voltage 10 v special reserved for future use thickness 0.5 0.15 mm ? packaging cardboard type, 7" reel b. samsung reliablility test and judgement condition capacitance within specified tolerance 1 ? 10% 0.50.1vrms tan (df) 0.125 max. insulation 10,000mohm or 50mohm ? ? rated voltage 60~120 sec. resistance whichever is smaller appearance no abnormal exterior appearance microscope (10) withstanding no dielectric breakdown or of the rated voltage voltage mechanical breakdown temperature x5r characterisitcs (from -55 to 85 , capacitance change shoud be within 15%) adhesive strength no peeling shall be occur on the 500g f, for 101 sec. of termination terminal electrode bending strength capacitance change : within 12.5% bending to the limit (1mm) with 1.0mm/sec. solderability more than 75% of terminal surface snag3.0cu0.5 solder is to be soldered newly 2455 , 30.3sec. (preheating : 80~120 for 10~30sec.) resistance to capacitance change : within 7.5% solder pot : 2705 , 101sec. soldering heat tan , ir : initial spec. sn 100% cu ni specification judgement test condition 250% a. samsung part number 0.5
vibration test capacitance change : within 5% amplitude : 1.5mm tan , ir : initial spec. from 10 ? to 55 ? (return : 1min.) 2hours 3 direction (x, y, z) moisture capacitance change : within 12.5% with rated voltage resistance tan 0.25 max 402 , 90~95%rh, 500+12/-0hrs ir : 8.8 ? ? or over high temperature capacitance change : within 12.5% wit h of the rated voltage resistance tan 0.25 max max. operating temperature ir : 17.7 ? ? or over 1000+48/-0hrs temperature capacitance change : within 10% 1 cycle condition cycling tan , ir : initial spec. min. operating temperatur e 25 max. operating temperature 25 5 cycle test c. recommended soldering method : reflow ( reflow peak temperature : 260+0/-5 , 10sec. max ) * for the more detail specification, please refer to the samsung mlcc catalogue. 100% judgement test condition
|